18 • 4. Remote Configuration
MCC201/MCC201H User manual
General
System ID
Enter System ID that is used as a camera title.
The set System ID is displayed with video image on Web browser.
The System ID is also transferred to remote software, such as VMS, and displayed on it.
Burnin OSD System ID
The text string added in here shall be inserted on top of video before encoding and it is
permanently included with video stream.
Only alphanumeric and blank characters are allowed. Position and size can be configured on
Burnin OSD section of Video page.
Language
Select the language to be used for web-based configuration.
Firmware
Firmware version
Displays the current firmware version.
Board ID
Displays the network board ID of the video server.
Upgrade
For the firmware upgrade.
1. Press Browse button to select a firmware file from the computer or network drive.
2. Press Firmware Upgrade button to start to upgrade.
3. Messages for showing status (downloading / upgrading) will be displayed.
4. The video server will reboot automatically after completing upgrade.
Note! Do not switch the power off during the firmware upgrade.
Be patient - the process may take several minutes.
To Next Page
Loading...
