MCC201/MCC201H User manual
5. Decoder Configuration • 55
Event Configuration
The event configuration configures the actions for each event type. Local section configures the actions for
events from local (self = Decoder) system, and configuration activates local devices and Remote sections
configures the actions for events from remote (Encoder or IP Camera) system.
The following table lists the possible actions for events:
Action Description
Beep Outputs beep sound using the buzzer in the system.
Alarm1/Alarm2 Triggers alarm (relay) port.
E-mail Sends E-mail to the specified address. AVI file can be attached.
FTP Upload AVI file to a specified FTP server.
Preset Moves the PTZ to associated preset position.
Sensor1 / Sensor2
Configure the actions when the sensor 1 or 2 is activated. Multiple actions can be set for a single event.
On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a single event.
To Next Page
Loading...
