MCC201/MCC201H User manual
4. Remote Configuration • 23
Bit rate
Determine bitrate value between 32 ~ 10240 kbps.
Bitrate mode (CBR encoding) allows you to set a fixed target bitrate that consumes a predictable
amount of bandwidth. In order to maintain the bitrate limit, the video is dynamically controlled regardless
the complexity or content changes on the incoming video.
I-Frame Interval
The I-frame interval can be selected between values 1 to 255. For example a value of 1 is meaning that
every sent frame is I-frame whereas a value of 25 is meaning that every 25th frame is an I-frame.
H.264 Profile
Select H.264 Profile: High Profile or Baseline Profile.
The standard defines various sets of capabilities, which are referred to as profiles, targeting specific
classes of applications.
- High Profile (HiP)
The primary profile for broadcast and disc storage applications, particularly for high-definition television
applications (for example, this is the profile adopted by the Blu-ray Disc storage format and the DVB
HDTV broadcast service).
- Baseline Profile (BP)
Primarily for low-cost applications that require additional data loss robustness, this profile is used in
some videoconferencing and mobile applications. This profile includes all features that are supported in
the Constrained Baseline Profile, plus three additional features that can be used for loss robustness
(or for other purposes such as low-delay multi-point video stream compositing).
Dual Encode
Use Dual Encode
Select ON to enable the dual encoding with a secondary video stream.
The secondary video can be viewed on Live View window by selecting Secondary on Video selection.
Dual Encode Algorithm
Select H.264 or MJPEG for the secondary streaming.
Both CBR and VBR modes are available. However the MJPEG is supported only by the VBR mode and
hence the video quality level needs to be assigned.
To Next Page
Loading...
