MCC201/MCC201H User manual
4. Remote Configuration • 41
Continuous Upload: Continuous upload ‘On’ allows video clips to be transmitted regularly regardless
of occurrence of events. When this mode is turned on, FTP upload by events is suppressed.
Upload Duration: Specify recording duration of a video clip to be transmitted. (Max 300 sec).
Upload Interval: Specify transmission interval. (Max 3600 sec).
Upload Duration is not included in Upload interval. For example, if Upload Interval is 60 seconds
and Upload Duration is 20 seconds, a video clip for 20 seconds is transmitted every 80 seconds.
FTP Test: FTP upload function can be tested with this button. Please note that configured settings should
be saved first by pressing Apply button before using FTP Test function. One of the following messages
will come as a result of the test.
Message Description
FTP connection tested
successfully
The connection to the FTP server is successful.
Failed to connect FTP server
The connection to the FTP server failed. It is necessary to check
if the server is reachable and server address and port are correct.
Authentication failed
The server is reachable but authentication failed.
ID and/or password need to be checked.
Failed to upload file
File upload failed. The user of the ID is not allowed for
writing into the directory or FTP server can be full.
Failed to erase file
Failed to delete the test file. The user of the ID doesn’t have
the privilege for file deletion.
To Next Page
Loading...
