Televes 7287 - Equipment Installation; Connections

User manual “DTR-7287 ”
34
This section explains the installation of the DTR 7287 Adaptor.
Read the manuals accompanying the equipment, for example, the manual for installing external equipment, such as aerials.
When you add a new piece of equipment, read the corresponding section of the manual before installing it.
- Connect the aerial to the ANT IN port of the Adaptor.
- Connect the Adaptor to the TV set using a SACRT.
- Connect the adaptor to the power point
4.1.- Connections
DTR-7287
TV
DO NOT PLUG IN the adaptor to the power grid before finishing all connections on the unit
All the cables used for connecting the Adaptors should be of the screen type
4.-Equipment Installation