COUPLE WITH CONFIDEA G3
With Plixus it is possible to combine wired units with wireless ones. You can add one or more Confidea G3
WCAPs to your Plixus network simply by connecting them to one of the conference ports. For more
information on the installation of the WCAPs in the Plixus network see "Install Confidea G3" on page68
We advise to first couple wireless units with the WCAPs in standalone mode and upgrade units
and WCAP to the latest version. When the devices need a new upgrade, you can simply uncouple
and update in standalone mode.
Couple WCAP With Engine
1. Go to Initialization and click Open initialization.
2. The engine will detect the WCAPs and display them in the list, click Stop initialization. The
WCAPs are now visible.
3. Select Confidea G3 coupling in the main menu. This screen will show you all available
WCAPs.
4. Click Enable coupling to connect with the Plixus system. After coupling you are able to see
which frequencies the WCAPs are using together with their MAC address.
Figure 1-48 Couple Confidea G3 WCAP with Plixus
COUPL E WITH CONF IDEA G 3 105
To Next Page
Loading...
