INSTALL CABLES
Use CAT 5e cables to connect Plixus AE-R or MME to the delegate and chairmen units, and to connect the
different units in a branch / loop. For more information on cable details, see "Cable requirements" on
page52.
Televic has standard pre-made cables available in different lengths:
YPC/2 2 m
YPC/5 5 m
YPC/10 10 m
YPC/20 20 m
The voltage level at the output of the central unit is 48 V. A voltage drop is caused by the length of the cable
and the number of units. The last unit of the branch should receive at least 36 V.
INSTALL CABLES 63
To Next Page
Loading...
