Open the cover of the central unit and insert the card in the position as indicated in the picture. Fix the
Dante™ card by means of two screws and put the cover back on the central unit.
Supported Video Formats
SD SDI
PAL
NTSC
HD SDI
720p: 23.976, 24, 25, 29.97, 30, 50, 59.94 and 60 Hz
1080p: 23.976, 24, 25, 29.97 and 30 Hz
1080i: 50, 59.94 and 60 Hz
3G SDI
1080p: 50, 59.94 and 60 Hz
Factory Defaults Restore Button
Figure 1-5 Reset button on Plixus MME
To restore factory default settings , push the button inside the small hole , next to the headphone connector
for at least 10 sec and release.
PL IX US MME 25
To Next Page
Loading...
