INTRODUCTION
Plixus features three different software components:
Default web server: the web server you see when you first use the system. Contains basic
functionalities that are also covered by Plixus Core.
Plixus Core: is a bundle of conference logic that runs on the Plixus system and allows to run the
conference system without a dedicated computer, but with the use of a web server.
CoCon: is the complete software suite for conference management.
Plixus Core
From CRP 5.1 onwards, the Plixus system provides the possibility to use Plixus Core. Below you can find a list
containing all functionality that is available in Plixus Core. This guide will discuss all these features together
with how to configure and use them.
Initialization of the units, creation of booths
Discussion parameters for microphone modes
Configuration of different audio settings such as the dynamics processor, auto gain reduction,
auxiliary input and output levels
Selection of basic audio routing presets (normal audio routing, N-1, external equalizer)
Interpretation configuration up to 11 languages and possibility to send language channels to
Dante
Operator page to control microphones
Recording of one or more channels
Regional settings such as date and time format
Manage network settings
Camera protocols
API
Plixus Core Versus CoCon
There are some differences between Plixus Core and the CoCon software. You cannot configure all
parameters of each feature in Plixus Core, for this you need a CoCon license. For a detailed description of
INTRODUCTION 70
To Next Page
Loading...
