EasyManua.ls Logo

Televic PLIXUS - Page 86

Televic PLIXUS
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Description
Override
> Not-selected: microphone will not become active when the maximum
number of open microphones is reached and you press the microphone
button. Another active microphone must switch off first. Deactivation is
possible by the delegate, via the operator page, through the chairman using
the API or CoCon.
> Selected: when the maximum number of open microphones is reached, the
first activated microphone will switch off when a delegate presses its
microphone button.
Allow delegates to switch
off their microphone
With this option you ensure delegates cannot switch off their own
microphone. Only the operator or chairman can do this.
Button toggle activation
Press the microphone button once to activate the microphone.
Button request activation
Keep button pressed to activate to microphone. When you release the button,
the microphone will switch off.
REQUEST
In request mode you do not automatically get the floor when you activate your microphone. First you have
to request the floor. The chairman then assigns the floor to a speaker using the next-in-line button (or using
the operator page, CoCon or the API). Which delegate may speak first is defined by the first-in-first-out
principle. The chairman units (or VIP units) can always speak immediately and do not have to request the
floor.
For request mode additional settings can be configured:
Parameter Description
Allow delegates to cancel
their request
Select this option to allow user to cancel their request to speak by pressing the
microphone button.
Allow delegates to switch
off their microphone
Select to allow user to switch off their microphone by pressing the microphone
button. If not selected the microphone will only switch off when another
events stops the microphone for example by using the operator page.
Enable reply
Select to enable the reply functionality. With this function you can reply to a
certain speaker which will put you in different request list that has priority over
the default request list. Define which button to use for the reply function
(Reply, Prior, Next).
DISCUSSIO N O PTIONS 86

Table of Contents

Other manuals for Televic PLIXUS

Related product manuals