AIRMAN 8+ Disassembly | en 27
Bosch Security Systems, LLC
Customer Maintenance Manual
2024-11 | 07 | F.01U.387.060
The thicker headpad is attached to its holder with Velcro
To replace the headband pad, do the following:
1. Grasp the edge of the headband pad.
Figure6.3: Removal of Thick Headpad from Holder
2. Gently pull the headband pad away from the headpad holder.
3. Align the new headband pad with the Velcro on headpad holder.
NOTE: The low profile headpad is not removable from its holder.
To Next Page
Loading...
