TP-8/16/24/32/64S User Manual Version No.: V1.2
- 35 -
：LAN port’s default IP is 192.169.0.1 / 255.255.255.0. It is suggested not to
make any modification but a special case! Especially ensure not to repeat LAN port
IP network segment and WAN port IP segment!
Explanations:
In Voice gateway there is a DHCP server, which is defaulted not to start using.
IP pool Start/End address cessation: It refers to DHCP server automatically
allocates IP’s beginning/ addresses cessation. To full extent it could have 254
addresses.
Lease Interval: It refers to the service time that terminal acquires an IP address,
defaulting to be 7200 seconds.
Default DNS (optional), input it in the DNS server offered by ISP. If there is any
question, please consult ISP.
Default gateway (optional), it is suggested to fill in LAN port’s IP address or in
designated exit gateway IP.
：If LAN port IP parameters (including IP address, subnet mask) are altered,
make sure IP pool address set in DHCP parameters is in the network segment where
new LAN port IP is also in, and restart Voice gateway. In order to make DHCP
server display its functions, TCP/IP protocol of each computer in local area network
must be set as “automatically acquired IP address”.
To Next Page
Loading...