TP-8/16/24/32/64S User Manual Version No.: V1.2
- 37 -
VLAN prior level is 802.1P. It ranges from 0~7.
Note: Before start, please firstly determine whether the entire transit network
backs up VLAN or not. Otherwise, it will contribute to some faults, such as IP
disconnection, DNS analysis failure, registration failure and so on.
Explanations:
Either TOS or DSCP, only one mode can be adopted;
TOS mode is not turned on by default;
TOS value is 5 by default;
IP Precedence is 5 by default;
DSCP mode is not opened by default;
DSCP value is 0 by default.
4.2.4 Vlan Settings
Port isolation:Enable by default.
4.3 SIP Settings
SIP parameters are set pursuant to soft switch.
The service provider usually has set the server’s parameters
beforehand. In case you need to set them by yourself,
To Next Page
Loading...