Telpo TP-8S - Ringing Polling Setting

TP-8/16/24/32/64S User Manual Version No.: V1.2
- 46 -
 The Caller Display Restrict:It is not enabled by default.
 Call Wait: It deems to be stated using;
 No disturb: The port will not be called in in enabled mode, so it needs to be
started;
 Call Hold mode: It covers standard, forbiddance, SSCC, PassiveMGC and default
standard;
 Callout Constraint.
 Usage pattern: Convention means common application, hotline means hotline
mode, and the default one is conventional mode;
 Hotline number: Enter the designated hotline number here after setting the usage
pattern as the hotline;
 Delay: It deems to be stated using;
 State Subscription: It is not started using by default;
 The registered status subscription user specifies the subscription user, which is not
enabled by default
 Session status subscription user, specified subscription user, not enabled by
default;
 Message Tx, specified message sent user, not enabled by default;
4.4.5 Ringing Polling Setting
When using sequential ringing, need the turn them to the minimum: Global Parameter
setting-timer setting-time of no answer.