Telpo TP-8S - 4.5.2 Prior Digit Map

TP-8/16/24/32/64S User Manual Version No.: V1.2
- 49 -
 Underweight length: It refers to the replacement rule of the number set as called
number;
 Overweight: It refers to the replacement rule of the number set as called number;
 Additional overweight: It refers to the replacement rule of the number set as
called number;
 Routing address: It is 0.0.0.0 by default, and used to register SIP server
configuration. If it is mutually called in a same device, it will be set as 127.0.0.1;
if it is point-to-point callin, it should be configured as the IP address of counter
party;
 Routing port: It should be filled in as requested by SIP server, and the default is
5060.
4.5.2 Prior Digit Map
 DigitMap: It is defaulted to be not enabled;
tings