Telpo TP-8S - 4.6.3 Timers

TP-8/16/24/32/64S User Manual Version No.: V1.2
- 52 -
4.6.3 Timers
Explanations:
 No dial-up timeout (T timer): It is 16 seconds by default;
 Dail-up timeout (S timer): It is 4 seconds by default;
 Timeout of number matching failure (L timer): It is 16 seconds by default;
 Timeout for no response to long calling: It is 32 seconds by default;
 Busy tone timeout: It is 16 seconds by default;
 Howler tone timeout: It is 16 seconds by default;
 Dialing-party ringback tone timeout: It is 60 seconds by default.
 The ringing sequence setting, set different ringing modes to distinguish between
group and out of group call.
 International Call setting, which limits international call out.