Telpo TP-8S - 4.4.4 Advanced Settings

TP-8/16/24/32/64S User Manual Version No.: V1.2
- 45 -
Accordingly, set the value small depending on the network rate. The default
value is 1, equal to 15ms;
 DTMF Mode: It supports inband, SIPINFO and RFC2833;
 DTMF gain: It is defaulted to be -4dB;
 Input gain; DSP input gain
 Output gain; DSP output gain
 Jitter buffer level: It is defaulted to be 120 milliseconds.
Explanations:
Fax parameters
 Fax error correction;
 Fax modes: It includes three modes of Voi ce, T38 and bypass (T30);
 The maximum rate;
 High-speed fax redundancy;
 Low-speed fax redundancy.
4.4.4 Advanced Settings
Explanations:
 Port choice: It means to choose serial number of the port needing configuration;