TP-8/16/24/32/64S User Manual Version No.: V1.2
- 81 -
#manage/snmp> trap set { parameter1 } { parameter2 }
The command is used to set trap’s port number and host IP. Parameter 1 is host IP, namely the address
that trap information is sent to; parameter 2 is trap’s port number, the default is 162. (All communities
here use the same trap configuration).
Example：#manage/snmp> trap set 192.168.3.17 162
Command for displaying SNMP configured information
#manage/snmp> show all
Once the command is carried out, all of snmp configured information will be shown.
To Previous Page
Loading...