Telstra Colombo - Personal Settings Customization

26 27
Using the phone
Personal settings
WARNING
When the phone is ringing, avoid holding
the earpiece too close to your ear as it may
damage your hearing.
To set the ring volume
1. Press , scroll to PERSONAL SET and
press .
2. HANDSET TONE is displayed. Press .
3. RING VOLUME is displayed. Press .
4. Scroll to adjust the ringer
volume level. Choose from: Ringer Off,
Low, Medium, High, Boost and Progressive
(increasing ring volume). The default
setting is High.
5. Press to save the settings.
6. Press to return to standby.
To set the ring melody
1. Press , scroll to PERSONAL SET and
press
.
2.
HANDSET TONE is displayed. Press .
3. Scroll
to RING MELODY . Press .
4. Press
to select the ringtone.
Choose from 10 ringer melodies. A sample
of the ringtone is played.
5. Press to confirm.
6. Press to return to standby.
To set a group melody
To benefit from this feature, you must
subscribe to Telstra Calling Number Display.
This menu enables you to select and set
the melodies to be played when there is an
external incoming call from a contact whose
name is stored in your phonebook and is part
of a group. You can associate one ring melody
Using the phone
to each group. There are three phonebook
groups (Group A, B, C) available for you to
organize your contacts. Each group can be
assigned a unique melody.
1. Press
, scroll to PERSONAL SET and
press
.
2. HANDSET TONE is displayed. Press and
scroll to GROUP MELODY . Press .
3. Scroll to select: GROUP A, B or C ,
then press .
4. Press to select the ringtone you
want for the group and press .
5. Press to return to standby.
To set the key tones on/off
When you press a key on the handset you
hear a beep. You can switch beeps on or off.
1. Press , scroll to PERSONAL SET and
press .
2.
HANDSET TONE is displayed. Press and
scroll to KEY TONE . Press .
3. Scroll
to select ON or OFF.
4. Press
to confirm.
5. Press
to return to standby.
To change the handset name
Personalise your handset, with a name
or location for example Peter or Bedroom.
Maximum 10 characters.
1. Press , scroll to PERSONAL SET and
press .
2. Scroll to HANDSET NAME and press .
The current name is displayed.
3. Press to delete the current name.
4. Enter the name you want, maximum 10
characters and press to save.
5. Press to return to standby.