EasyManua.ls Logo

Telstra Colombo - Ring Delay and Remote Access

Telstra Colombo
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50 51
The answering machine The answering machine
Ring delay
Select the duration of rings before your
answering machine picks up the call. Choose
from 2-9 rings or Toll Saver.
If Toll Saver is selected, then:
If you have new messages your phone
answers after 2 rings.
If there are no new messages it will answer
after 6 rings. So you have the option to
hang up, saving the time and cost of a call.
If the memory is full, it will answer after 20
rings in Answer Only mode.
1. Press
scroll to
ANSW
MACHINE
and press .
2. Scroll to
ANSW SETTINGS
and press
3.
RING DELAY
is displayed. Press .
4. Scroll
to select
2-9 RINGS
or
TOLL SAVER
.
5. Press
to confirm.
NOTE When the answering machine is switched off it
will still answer after 20 rings.
Remote access
Remote access allows you to operate your
answering machine and listen to your
messages by calling your Telstra Colombo
from another phone.
The default setting is ON.
1. Call your Telstra Colombo. When you hear
your outgoing message, press .
2. Enter your 4 digit PIN. The default code is
0000. You will hear a confirmation beep.
NOTE Change this code for increased security. See the
section headed ‘PIN’.
3. After entering your PIN as stated above,
use the keypad to operate your Telstra
Colombo answering machine:
Play messages
Play previous message
Play next message
Delete message playing
Switch answer machine on
Stop playback
Switch answering machine off
NOTE When the answering machine is switched off it
will still answer after 20 rings.
To turn remote access on/off
1. Press scroll to
ANSW
MACHINE
and press .
2. Scroll
to
ANSW SETTINGS
and press .
3. Scroll
to
REMOTE ACC
and press .
4. Scroll
to select
ACTIVATED
or
DEACTIVATED
.
5. Press to confirm.

Table of Contents

Related product manuals