Telstra Colombo - Phonebook Management; Storing and Viewing Contacts

34 35
Phonebook
The Colombo handset phonebook can store
up to 100 names and numbers.
NOTE Numbers can be up to 24 digits long and
names up to 12 characters long. Entries are stored in
alphabetical order.
To view and dial phonebook entries
1. Press . Display shows the first entry.
2. Scroll to the entry you want. Or
To search alphabetically, press then
press the key with the first letter of the
name, e.g. if the name begins with N,
press 6 twice. The display shows the first
entry beginning with N. If required, press
to scroll to the exact entry.
3. Press to dial the entry displayed.
To store an entry
1. Press . PHONEBOOK is displayed.
2. Press
. NEW ENTRY is displayed.
3. Press
. ENTER NAME is displayed.
4. Enter a name and press .
5. Enter a number. Press to save. Press
to select NO GROUP, GROUP A, B
or C and press to confirm.
6. Press to return to standby.
NOTE: You can assign individual contacts to specifi c
groups of your choice. For example, Group A contains
phone numbers of all your co-workers. You can also
assign a specifi c ring melody to that group (see Group
melody). You can benefi t from this feature only if you
have subscribed to Telstra’s Calling Number Dsplay
service. If it is the case, every time someone from
that group calls you, you will hear the designated
ringtone for that group.
Cancel storing an entry by pressing at any time
during the process.
Phonebook
Entering names
Use the alphanumeric keypad to enter names
in the phonebook.
For instance to enter the name Paul
P Press once
A Press
once
U Press twice
L Press three times
To enter a space press
Press to delete a character or press and
hold to delete all characters.
Character map
Key characters & symbols
1 Space 1 - < > *
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8 ?
9 W X Y Z 9
0 - / \ # +
Enter a pause
If your Telstra Colombo is connected to a
PABX, you may need to enter a pause in a
stored number. This gives the PABX time to
get an outside line. A pause is normally stored
after the PABX access code (e.g. 9).