28 29
Using the phone Using the phone
To set auto pick up answer
With auto pick up switched on, you can
answer a call just by lifting the handset off
the base or charger. If switched off, you will
have to press
to answer a call. The
default setting is OFF.
1. Press
, scroll to
PERSONAL SET
and
press .
2. Scroll to
AUTO PICK UP
. Press .
3. Scroll to select
ON
or
OFF
.
4. Press to confirm.
5. Press to return to standby.
To set auto hang up
With auto hang up switched on, you can end
a call just by replacing the handset on the
base or charger. If switched off, you have to
press to hang up. The default setting is
ON.
1. Press
, scroll to
PERSONAL SET
and
press .
2. Scroll
to
AUTO HANG UP
. Press .
3. Scroll
to select
ON
or
OFF
.
4. Press
to confirm.
5. Press
to return to standby.
NOTE If auto hang up is set to OFF then placing the
handset in the charge cradle whilst on a call will
activate handsfree mode on the handset.
To set the display language
1. Press , scroll to
PERSONAL SET
and
press .
2. Scroll to
LANGUAGE
. Press .
3. Scroll to select the language
you want.
4. Press to confirm.
5. Press to return to standby.
To set babysit mode on
Leave one handset in a room and use another
handset to hear sounds in that room.
1. Press
, scroll to
PERSONAL SET
and
press .
2. Scroll
to
BABYSIT MODE
. Press .
3. Press to select
ON
or
OFF
.
4. Press to confirm.
When switched on, you can leave this
handset in the room you wish to monitor.
Only the microphone is on. Anyone in the
room cannot hear you.
5. Place that handset in the room.
6. At a second handset, press and enter
the number of the handset you are using as
a room monitor. You can now hear sounds
coming from the room.
To stop room monitoring at any time,
press .
To set the backlight on/off
1. Press , scroll to
PERSONAL SET
and
press
.
2. Scroll
to
BACKLIGHT
. Press .
3. Press
to select
ON
or
OFF
.
4. Press
to confirm.
To lock the keypad
Prevent accidental dialling while carrying the
handset by locking the keypad.
1. Press and hold . The display shows
KEYS
LOCKED
.
2. To unlock the handset, press and hold
again.
NOTE While the keypad is locked, you can answer
incoming calls as normal.