Telstra T-BOX - Page 20

17
Set up a Wi-Fi connection using Wi-Fi Protected Setup (WPS)
To connect using WPS you will need a compatible Wi-Fi modem or gateway.
Below is the current range of Telstra recognised and supported WPS modems.
If you have your own Wi-Fi modem or gateway check your user manual
to see if it has WPS.
Telstra Supported WPS Wi-Fi modem gateways:
•TechnicolorTG587n3(PremiumHNG)orTechnicolorTG797nV3(T-Gateway)
for ADSL connections
•NetgearCG3100v2orNetgearCGD24Nforcableconnections
•NetgearEVG2000sforVelocityconnections
When you get to the Internet Connection follow the on-screen instructions:
•Selecttheoptiononthescreencalled‘ConnectviaWi-Fi’andpressOK.
•Select‘ConnectusingWPS’
•PrepareyourWi-FimodemtoconnectbypressingandholdingtheWPSbutton.
•Theindicatorlightsshouldashwhilepairing.Itmaytakeafewminutesfor
your T-Box
®
andgateway/modemtopairup
•AconrmationscreenwillbedisplayedonyourTV
Once you have a conrmed connection, you can continue the setup process.
Note: Because your Wi-Fi network can still work if your home network gateway
loses its internet connection, connecting your T-Box to the modem doesn’t
automatically mean you have an internet connection. Please see page 49 for more
information about System Information and network diagnostics.