Teltonika FM3602 - Max Allowed Speed (ID=1605); Overspeeding Scenario (ID=1601); Jamming Detection Scenario (ID=1606); Immobilizer Scenario (ID=1607)

80
0.1
1.0
-
Green Driving scenario (ID=1600)
U16
8.6.5 Max allowed Speed (ID=1605)
It is max allowed speed which can be reached. If this value exceeded Over speeding event
will occur.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
260
-
Green Driving scenario (ID=1600)
U16
8.6.6 OverSpeeding scenario (ID=1601)
OverSpeeding scenario can be enabled to work with 3 different ways: Dout not control
scenario (value 1), Dout1 controls scenario (value 2), Dout2 controls scenario (value 3). To
disable OverSpeeding scenario value 0 is used.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0
3
0
U8
8.6.7 Jamming detection scenario (ID=1606)
Jamming detection scenario can be enabled to work with 3 different ways: Dout not
control scenario (value 1), Dout1 controls scenario (value 2), Dout2 controls scenario (value 3).
To disable Jamming detection scenario value 0 is used.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0
3
0
U8
8.6.8 Immobilizer scenario (ID=1607)
Immobilizer detection scenario can be enabled to work with 3 different ways: Dout not
control scenario (value 1), Dout1 controls scenario (value 2), Dout2 controls scenario (value 3).
To disable Immobilizer detection scenario value 0 is used.
Minimum
value
Maximum
value
Default value
Goes with (depends on)
parameters
Value
type
0
3
0
U8
8.6.9 Immobilizer ignition timeout(ID=1609)
This feature sets the time, in seconds, on which ignition can be turned off without
additional iButton identification.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
5
65535
-
U8
8.6.10 iButton list checking scenario (ID=1608)
iButton list checking detection scenario can be enabled (value 1) or disabled (value 2).
Minimum
Maximum
Default value
Goes with (depends on)
Value