TEM A07EXXXX – 1 Unit Transmitters Page 8
3.3 General safety recommendations
When connecting the equipment to the power , please follow these important recommendations:
This product is intended to operate from a power source that will not apply more than 10% of the voltage
specified on the rear panel between the supply conductors or between either supply conductor and
ground.
A protective-ground connection by way of the grounding conductor in the power cord is essential for safe
operation.
This equipment is grounded through the grounding conductor of the power cord.
To avoid electrical shock, plug the power cord into a properly wired socket before connecting to the product input
or output terminals.
Upon loss of the protective-ground connection, all accessible conductive parts (including parts that may
appear to be insulating) can render an electric shock.
To avoid fire hazard, use only the fuse of correct type, voltage rating, and current rating.
Refer for use replacement to qualified service personnel.
To avoid explosion, do not operate this equipment in an explosive atmosphere.
To avoid personal injury, do not remove the product covers or panels.
Do not operate the product without the covers and panels properly installed.
To Next Page
Loading...