Chapter 2 Internet Connection Setup
8
3. When the RE LED displays a solid light, the wireless range extender will
be connected to your desired router successfully. You can also login to
the web management interface to check bridge status.
Note -------------------------------------------------------------------------------------
1. Ensure the wireless range extender is placed near the wireless router for
better performance.
2. AS the latest WPS 2.0 only supports WPA2 security mode, we
recommend you use Method One to configure this device or set your
wireless router’s security mode to WPA2.
3. To implement the WPS feature, your wireless router must support and
enable this feature.
--------------------------------------------------------------------------------------------
2.3 Internet Connection Setup
Configure IP
Configure your PC obtain IP address automatically. If you are not clear about
this, please refer to Appendix 1 Configure IP.
Web Login
1. Launch a browser, and usually it will login automatically. If not, input
re.tendacn.com in the address bar and press Enter.
To Next Page
Loading...
Need help?
General
