Chapter 2 Internet Connection Setup
4
Chapter 2 Internet Connection Setup
2.1 Hardware Installation
1. Position the wireless range extender close to a wireless router or access point and
then plug it into a power outlet nearby.
2. Connect your Wireless Clients (such as notebook, pad, smart phone, etc.)
to the range extender wirelessly. Or you can connect your PC to the sole
LAN port of Range Extender with an Ethernet cable.
2.2 Configure the Range Extender
Method One: Setup by Web-based Management Page
Application example:
Assuming the remote wireless router has the following information:
SSID: Tenda_881218
Security Mode: WPA-PSK
Cipher Type: AES
To Next Page
Loading...
