Tenda A300 - Position Your Wireless Range Extender

Chapter 1 Product Overview
2
LED
LED
Status
Description
PWR
Solid
Proper connection to power supply
RE(Range
Extender)
Solid
Bridged successfully
Blinking
Negotiating key
Off
Not bridged
(Signal
Strength)
Solid Green
Strong signal
Solid Orange
Weak signal
Off
Not bridged
LAN
Solid
Proper connection is established on the
LAN port.
Blinking
Data transmitting on the LAN port
Port & Button
1 LAN： Port for connecting to a PC, switch or router.
2 RESET: Press it for over 7 seconds until the PWR LED is no longer
blinking to restore factory default settings. For default settings, please
refer to Appendix 2.
3 : Range Extender button for wireless extension.
Label
You can acquire the following information from Label:
1. Model: Displays the product model.
2. Default Access: The default web login is http://re.tendacn.com.
3. Password: The default password is admin.
4. MAC: Displays the device's default MAC address. By default, this device’s
wireless network name (SSID) is Tenda_XXXXXX, where XXXXXX is the last
six characters of the MAC address.
1.3 Position Your Wireless Range Extender
For best performance, follow rules below to place your wireless range
extender: