8. Q:I cannot access Internet in WISP Mode; what should I do?
A: Make sure your wireless network adapter is functioning
correctly on your PC and wireless signal is strong enough. If there
are too many available wireless networks, it is advisable to use
802.11 b/g mode for less interference.
B: Make sure you entered correct SSID and MAC address of the
link partner on the device. It is advisable to use the “Open scan”
option.
C: Make sure the device WAN IP and LAN IP addresses are not on
the same IP net segment. If so, change the device LAN IP.
D: Make sure antenna on the device is not detached.
If you still are unable to access Internet after you tried all the
above steps, contact our technical staff for help.
Add: Tenda Industrial Zone, No.34-1
ShilongRoad,ShiyanTown,BaoanDistrict,Shenzhen,China. 518108
General Inquiries
Tel: (86)755-27657180 Fax: (86)755-27657178
Email: sales@tenda.com.cn
Email: support@tenda.com.cn
Skype: tendasz
MSN: tendasz@hotmail.com
Website: www.tendacn.com
SHENZHEN TENDA TECHNOLOGY CO.,LTD
www.tendacn.com
To Next Page
Loading...
Need help?
General
