If the bridge failed, try solving the problem as follows:
Verify that the Router A’s DHCP server is enabled. If not,
Enable the Router A’s DHCP sever.
Or click Internet Settings, select Static IP, type the required info in the corresponding field, and
click OK.
Note
1. The WiFi Schedule, WPS, Guest Network, Smart Power-save, and IPTV feature are not available
when the Router B is in WISP mode.
2. The configuration of the Router b’s wireless channel won’t take effect after bridge.
3. If Router B’s LAN IP address is the same as that of Router A, it will be changed into another one
automatically which is not in the same network segment as that of Router A after bridge. For example,
if the Router A and Router B’s LAN IP address are all 192.168.0.1, the Router B’s LAN IP address
will be changed into 192.168.1.1 after bridge. You can use 192.168.1.1 or the domain name
tendawifi.com to log in to the Router B’s User Interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
