Document Version: V1.3
98
Auto Maintenance
Overview
Navigate to Configuration > Channel > Auto Maintenance.
You can perform maintenance operations for the camera, such as reboot, scheduled reboot, reset
to default settings and restore to default settings.
Reboot
The reboot can prevent the camera from running for a long time, which may cause its performance
to degrade and become unstable. You can reboot the camera immediately according to the actual
condition.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > Channel > Auto Maintenance.
Step 3 Select the channel of the camera to be rebooted, which is D1 in this example.
Step 4 Click Reboot.
Step 5 Read the prompt message, and click OK.
---End
Settings completed. The camera D1 will be rebooted now.
To Next Page
Loading...