Document Version: V1.3
104
Schedule
Overview
Navigate to Configuration > Storage > Schedule.
After the schedule is set, the system will record according to the schedule. By default, the system
presets the schedule of 24 hours continuous normal recording for each channel, and you can
modify the recording time and recording type as required.
Parameter & button description
Specifies the channel chosen to set the schedule.
Specifies whether the recording function is enabled.
Green means normal recording. Specifies the NVR always records.
Click this button to draw the recording time in the timetable below.
Red means alarm recording. Specifies the NVR will record only when
the camera triggers an alarm. Click this button to draw the recording
time in the timetable below.
To Next Page
Loading...