Tenda N3L-4H - Page 119

Document Version: V1.3
111
Parameter
Description
Arming Sched.
Arming
Used to set an arming schedule.
Click this button to draw the motion detection time in the timetable
below.
Clear
Used to clear the time that has been set in the timetable below.
Click this button to clear the motion detection time in the timetable
below.
Edit
Used to edit the motion detection schedule of a specific time.
Clear All
Used to clear the current arming schedule.
Linkage Action
Common Linkage
Specifies the ordinary alarm method of the NVR after an alarm is
triggered.
- Single Screen Display: The alarm channel is displayed on a single
screen on the Live View page after an alarm is triggered.
- Send Email: The system will send an alarm email to the preset
receiver email after an alarm is triggered. You need to set the
relevant parameters of email for this alarm method to take
effect. Refer to Email Configuration for details.
- Message Notification: The system will send an alarm notification
to TDSEE App after an alarm is triggered. The NVR needs to be
added successfully through TDSEE App. Refer to Manage the
NVR through TDSEE App for details.
- Audio Alarm (Camera): The camera of the alarm channel will
alarm through the audio after an alarm is triggered.
- Light Alarm (Camera): The camera of the alarm channel will
alarm through the supplement light after an alarm is triggered.
Sound & Light
Linkage
Specifies the sound and light alarm method of the NVR after an alarm
is triggered.
- Audio Alarm: The camera of the alarm channel will sound after
an alarm is triggered. Refer to Sound & Light Alarm for details.
- Light Alarm: The camera of the alarm channel will flash the fill
light after an alarm is triggered. Refer to Sound & Light Alarm for
details.
To ensure that the sound alarm or light alarm works properly, check
that the Arming Sched. of the sound & light alarm takes effect
within the period when the Arming Sched. of motion detection is
effective.