Document Version: V1.3
117
Parameter & button description
Specifies the channel chosen to set the tampering detection alarm.
Specifies whether the tempering detection function is enabled.
Specifies the detection sensitivity threshold that triggers an alarm. The
larger the value, the easier it is to trigger an alarm.
Used to set an arming schedule.
Click this button to draw the tempering detection time in the timetable
below.
Used to clear the time that has been set in the timetable below.
Click this button to clear the tempering detection time in the timetable
below.
Used to edit the tempering detection schedule of a specific time.
Used to clear the current arming schedule.
Specifies the alarm method of the NVR after an alarm is triggered.
- Single Screen Display: The alarm channel is displayed on a single screen
on the Live View page after an alarm is triggered.
- Send Email: The system will send an alarm email to the preset receiver
email after an alarm is triggered. You need to set the relevant
parameters of email for this alarm method to take effect. Refer to Email
Configuration for details.
- Message Notification: The system will send an alarm notification to
TDSEE App after an alarm is triggered. The NVR needs to be added
successfully through TDSEE App. Refer to Manage the NVR through
TDSEE App for details.
Specifies the system enables the selected channel to record after an alarm
is triggered.
Ensure that a schedule has been set for the channel of the arming schedule.
Used to synchronize the current schedule with other channels.
To Next Page
Loading...