Document Version: V1.3
118
Configure Tempering Detection Alarm
Scenario: Assume that you have set up a monitoring network with an NVR, installed four cameras
and bound D1 to D4 respectively.
Requirement: The tempering detection function is enabled for all cameras at 8:00 to 22:00 from
Monday to Friday. When a tempering detection alarm is triggered, an alarm notification is pushed
to the TDSEE app, an email is sent to the designated recipients, and trigger the corresponding
channel for recording.
Solutions: Configure the Tempering Detection and Email Configuration functions to meet this
requirement.
Assume that:
- SMTP server address: smtp.gmail.com
- SMTP service port: 465
- Sender email address: Tom@gmail.com
- Encryption mode: SSL
- Recipient email address: Jerry@gmail.com
To Next Page
Loading...