Document Version: V1.3
160
Refer to Internet Settings for the camera accesses to the internet method.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > System > Time.
Step 3 Select the time zone in which the NVR locates.
Step 4 (Optional) Select the system time display format.
Step 5 Set Time Synchronization, which is Internet in this example.
Step 6 Click Save at the bottom of the page.
---End
After the setting completes, you can check whether the System Time on the page is accurate.
To Next Page
Loading...