EasyManuals Logo

Tenda O3 User Manual

Tenda O3
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
107
----End
Parameters Description
Name
Description
WMM
WMM is a wireless QoS protocol ensuring that packets with higher priorities are transmitted
earlier. This ensures better QoS of voice and video applications over wireless networks. You are
recommended to enable it.
APSD
Automatic Power Save Delivery. If it is enabled, the power consumption of this device is reduced
after a specified period during which no traffic is transmitted or received. By default, it is
disabled.
Minimum RSSI Threshold
It specifies the minimum strength of received signals acceptable to this device. If the strength of
the signals transmitted by a wireless device is weaker than this threshold, the wireless device
cannot connect to this device. If there are multiple CPEs in a network, setting a proper value
helps wireless devices connect to WiFi network with better WiFi signal.
Preamble
It specifies a group of bits located at the beginning of a packet to enable a receiver of the packet
to perform synchronization and prepare for receiving data. By default, the Long Preamble option
is selected for compatibility with old network adapters installed on wireless clients. To achieve
better synchronization performance of networks, you can select the Short Preamble option.

Table of Contents

Other manuals for Tenda O3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O3 and is the answer not in the manual?

Tenda O3 Specifications

General IconGeneral
5 GHzNo
2.4 GHzYes
Number of users15 user(s)
Transmitting power29 dBmW
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivityMCS0: -88dBm MCS7: -72dBm
Maximum outdoor range5000 m
Maximum data transfer rate150 Mbit/s
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
PlacementWall
CertificationFCC / CE / RoHS
Product colorWhite
LED indicatorsLAN, Power, WAN
International Protection (IP) codeIP64
Antenna featuresIntegrated antenna
Antenna gain level (max)12 dBi
Output current1 A
Output voltage12 V
Power consumption (max)6 W
Security algorithmsWPA, WPA2, WPA2-PSK
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth94.86 mm
Width270 mm
Height67.5 mm

Related product manuals