Tenda W330R User Manual

Wireless-N Broadband Router
authentication. Generally
speaking, AP mode is
passive to be connected
with work station, but
Station mode always takes
the initiative in connecting
with AP.
SSID: SSID is the unique
ID name of access point.
The wireless work station
must keep the same SSID
name with the AP's for
connections. By enabling
Open Scanning button,
the device can search
available APs.
MAC: To connect certain
AP, you need to know the
AP's MAC address. By
enabling Open Scanning
button to find out the
available AP’s MAC
address.
Channel: You can use the
channel same as the AP.
26

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %