Tenda W330R User Manual

Wireless-N Broadband Router
secret keys by manual.
WPS Mode: Supports two
ways to configure WPS
settings:
PBC (Push-Button
Configuration) and PIN
code.
PBC: Select the PBC or
press the WPS button on
the panel of the Router
(Press the button for one
second and WPS indicator
will be blinking for 2
minutes, which means the
WPS is enabled. During
the blinking time, you can
enable another Router to
implement the WPS/PBC
negotiation between them.
At present, the WPS only
support one client access.
Two minutes later, the
WPS indicator will be off.).
PIN: If this option is
enabled, you need to enter
41

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %