Tenda W330R User Manual

Wireless-N Broadband Router
you need to add the
Wireless MAC address of
the connecting device into
the Router's AP MAC
address table or select
one from the scanning
table. At the same time,
the connecting device
should be in Lazy,
Repeater or Bridge mode.
Repeater Mode: You can
select the mode to extend
the distance between the
two WLAN devices.
Functioning as a WDS
repeater, the W330R
connects to both a client
card as an AP and to
another AP. In typical
repeater applications, APs
connecting to other APs
equipped with WDS
functionality must also
support WDS. In this
mode, you need to add the
MAC address of the
connecting device into the
43

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %