Terex DTM 00101 (standard) - General Safety Notes

2 SAFETY
16
2.4.1 (ISO) Safety Signs
The safety signs are located in/on the machine as indicated. (Descriptions of the
symbols are provided in section 2.3)
Key
1. Fall hazard
2. Read operator’s manual / fall hazard / fire hazard (inside cab enclosure)
3. Skin (oil) injection hazard
4. Entanglement hazard (engine compartment)
5. Tie down location (found beneath loader in front locations)
6. Crush hazard (run over)
7. Crush hazard (lift arm brace)
8. Crush hazard (lift arms)
2030-416
2030-415
2030-417
2030-425
2030-553
2046-146
1
3
8
2
5
7
6
2030-551
4
5