Terex PT100 Forestry - Lubricant & Fuel Specifications; Engine Oil and Coolant Specifications; Hydraulic Oil and Grease Specifications

Chapter Overview
When replacing or replenishing the fluids and lubri-
cants in the PT-100 Forestry Compact Track Loader,
use Terex products. This ensures that the new fluids
and lubricants match those originally installed when
the machine left theTerex factory. Terex products were
developed for, tested and approved by Terex to assure
optimum life and performance in all Terex Compact
Track Loader, when used as recommended.
Fluids
Engine Oil
• Terex Heavy Duty Engine Oil, 10W-30
Capacity: 8.5 U.S. quarts (8.04 L) (incl. filter)
P/N: 0300-767 1 quart (.94 L)
P/N: 0402-838 12 quarts (11.36 L)
P/N: 0402-839 1 gallon (3.78 L)
P/N: 0402-840 6 gallons (22.71 L)
Engine Anti-freeze/Coolant
• Terex Long-Life 50/50 Antifreeze/Coolant
Capacity: 3.125 U.S. gallons (11.83 L)
P/N: 0300-766 1 gallon (3.78 L)
P/N: 0402-841 6 gallons (22.71 L)
Hydraulic Oil
• Terex Premium All Season MV Hydraulic Oil
Capacity: 20 U.S. gallons (75.71 L) (incl. filters)
P/N: 0400-253 5 gallons (18.93 L)
P/N: 0402-833 55 gallons (208.2 L)
Grease (general-use)
• Terex Multi-Purpose EP Lithium Grease
P/N: 0300-769 1 tube
P/N: 0402-844 10 tubes
P/N: 0402-834 40 tubes
Grease (undercarriage wheel bearing)
• Terex Undercarriage wheel bearing lube
P/N: 0402-842 1 bottle
P/N: 0402-843 10 bottles
If Terex products are not available, use high quality
substitutions that meet or exceed factory installed fluid
specifications.
Fuel Specifications
Diesel fuel is distilled from crude oil, identified as No.
1-D or No. 2-D in “ASTM D975”, EN590 generally
meet machine requirements.
12. Lubricant & Fuel
Specifications
12-1