OPERATION
PLACING A LOAD
it
DANGER
Traveling with a reading
of
more than 0 degress on the
boom
angle indicator arrow (A)
may
cause a rollover hazard.
Gradually move the 4-way controller towards the letter (B) to
lift the load vertically.
Hold
the controller back until the
required height has
been
achieved.
Gradually move the 4-way controller towards the letter (E) to
bring the load
DOWN
and OUT into final position. Lower the
load until the weight is completely
off
the forks.
Gradually move the 4-way controller towards the letter (F) to
bring the boom
UP
and
IN. This will bring the forks out
ofthe
load. Once the forks are clear
of
the load the
boom
can
be
lowered.
4-18
A
D
c
F~
l
To Next Page
Loading...
