Cyber Hardened IBUC Console and SSHv2 Command Set | C-19
CPS
Description: Sets the password for the user who is logged in. To change password for
other users use “ADU” command on page C-3. The password does not take effect until
the next login. You cannot query this item.
Parameter:
<New Password>
New password for current user [String]
CRT
Description: Display or configure the internal 10 MHz source frequency. When the
IBUC is equipped with an internal 10 MHz source, the user can trim the frequency
output of the IBUC. Depending upon the frequency band, the incremental frequency
movement at the output of the IBUC will vary..
Parameters:
<Value>
Internal 10 MHz source trim value [0 to 4095]
Command: CPS=<New Password>
Response: TBD
Query: CRT
Response: CRT=<Value>
Command: CRT=<Value>
Response: CRT=<Value>
To Next Page
Loading...
