TESTO 868 - WLAN Connection; Activating and Disabling WLAN

5 WLAN connection - using the App
16
5 WLAN connection - using the App
5.1 Activating/disabling the connection
To connect via WLAN, you need a tablet or smartphone with the testo
Thermography App already installed on it.
You can get the App from the App Store for iOS devices or from the
Play Store for Android devices.
Compatibility:
Requires iOS 8.3 or later/Android 4.3 or later
1 - Open Menu.
2 - Move the joystick down and select Configuration.
- Press OK or move the joystick to the right.
3 - Move the joystick down and select Connectivity.
- Press OK or move the joystick to the right.
4 - Select WLAN and press OK to activate (a tick appears when WLAN
is activated).
While WiFi is activated, the image gallery cannot be accessed.
Explanation of WLAN icons
Icon Function
App is connected
No connection to the App
5.1.1 Establishing a connection

- WLAN is activated in the thermal imager.
1 - Smartphone/tablet -> Settings -> WLAN settings -> camera is
shown with serial number and can be selected.