6 Performing the measurement
31
1 - Open the SuperResolution function.
2 - Press OK to activate or disable the function.
6.9.3 Save JPEG function
Infrared images are saved in BMT (image with all temperature data) format. The
image can also be saved in JPEG format (without temperature data) at the
same time. The image content corresponds to the infrared image shown on the
display, including scale display and image marks for the selected measuring
functions. The JPEG file is saved under the same file name as the associated
BMT file and can be opened on the PC, even without using the IRSoft PC
software.
1 - Open the Save JPEG function.
2 - Press OK.
3 - Move the joystick up/down until On/Off is selected.
4 - Press OK.
5 - Add a date/time stamp to a JPEG file if required. Turn function on or
off for this.
6.9.4 Connectivity
Enable/disable WLAN
1 - Menu -> Configuration -> Connectivity
2 - Move the joystick to the right (>).
- Select WLAN and press OK to enable (✔) or disable the function.
3 - Press Esc to cancel the process.
To Next Page
Loading...
