6 Performing the measurement
28
6.6 Selecting the colour palette
This function is only available if the Image type is set to infrared image.
1 - Select the Palette function.
2 - Move the joystick up/down to select the required colour palette and
then press OK.
6.7 Image type
The display can be switched between infrared image and real image (digital
camera).
1 - Select the Image type function.
2 - Move the joystick up or down and choose between infrared image or
real image view.
3 - Press OK to confirm the selection.
6.8 Activating the differential temperature
Differential temperature enables the temperatures between two measuring
points to be calculated.
1 - Open Menu.
2 - Move the joystick down and select Measurement. Then press OK or
move the joystick to the right.
3 - Move the joystick down and select Differential temperature. Then
press OK.
4 - Move the joystick down/up and select which differential temperature
is to be calculated (Point-Point, Point-Probe, Point-Value, Point-
RTC). Then press OK.
4.1 - Point-Point selection:
To Next Page
Loading...
