TESTO 868 - Reset Options

6 Performing the measurement
33
6.9.8 Reset options
Reset counter
After a reset, the consecutive numbering of images starts again from
the beginning. When saving images, already saved images with the
same number are overwritten!
Back up all saved images before resetting the counter to prevent
possible overwriting.
1 - Menu -> Configuration -> Reset counter
2 - Select the Reset counter function.

Reset image counter? is displayed.
3 - Press OK to reset the counter.
3.1 - Press Esc to cancel the process.
Factory settings
The instrument settings can be reset to the factory settings.
Time/date, country settings and counter are not reset.
1 - Menu -> Configuration -> Reset options.
2 - Select the Factory settings function.

Apply factory settings? is displayed.
3 - Press OK to apply factory settings.
2.1 - Press Esc to cancel the process.
Formatting
The image memory can be formatted.
When formatting, all data saved in the memory is lost.
Back up all saved images before formatting to prevent loss of data.
Formatting does not reset the counter.
1 - Menu -> Configuration -> Reset options.