TESTO 868 - System Configuration and Reset Options

6 Performing the measurement
29
o Move the joystick to the right -> select measuring point 1 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o Move the joystick to the right -> select measuring point 2 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o End measurement: move the joystick to the right, press End.
4.2 - Point-Probe selection:
o Move the joystick to the right -> select measuring point 1 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o End measurement: move the joystick to the right, press End.
4.3 - Point-Value selection:
o Move the joystick to the right -> select measuring point 1 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o Move the joystick to the right, set the value manually.
o End measurement: move the joystick to the right, press End.
4.4 - Point-RTC selection:
o Move the joystick to the right -> select measuring point 1 ->
press OK -> move the measuring point to the live image using
the joystick -> press OK.
o Move the joystick to the right, set the value manually.
o End measurement: move the joystick to the right, press End.
6.9 Configuration
6.9.1 Settings
Country settings
The user interface language can be set.
1 - Select the Country settings function.
2 - Move the joystick up/down to select the required language and
then press OK.