Revision Release date Improvements
°C in alarm settings
• A maintenance page is shown when
maintenance work on the Cloud is being carried
out
• When changes to the selected
analysis area were carried out, individual errors
in the presentation occured. This has been
corrected
• For months with fewer than 31 days,
the full 31 days could still be selected in the
time selection. This error has been rectified
• Only a limited number of characters
could be used for descriptions. The length of
the fields has been adjusted accordingly
• Suspended alarms are now identified
as such
• Alarm limit values outside the physical
limits of the testo Saveris 2 probes can no
longer be entered (e.g. 105 %RH)
10955 2015-04-07 • The quick start guide is adapted to
the new licence model
• Some bugs in the graphic function are
resolved
• Measurement point names are shown
instead of channel names above the graphic
• The error that the alarm symbol
shows “disabled” has been rectified
To Next Page
Loading...
